Description
BRAND Kennametal Pack of 5
Item
MSRP: $130.00
- specs
ANSI Insert Code CCMT32505
ISO Insert Code CCMT09T302
Relief Angle 7
Insert Style CCMT
Corner Radius (Inch) 1/128
Corner Radius (Decimal Inch) 0.0079
Included Angle 80
Manufacturer Grade KC5010
Coating/Finish TiAlN
Wiper Edge No
Insert Hand Neutral
Insert Thickness (Inch) 5/32
Insert Thickness (Decimal Inch) 0.1563
Series Screw-On
Inscribed Circle (Decimal Inch) 0.3750
Inscribed Circle (Inch) 3/8
Insert Material Carbide
Insert Shape C – Diamond (Rhombic) 80-Deg
Chip Breaker Operation Light Machining; Finishing
Grade Characteristics Cast Iron (K) – High Wear-Resistance to Moderate Wear-Resistance and Toughness; Aluminum & Non-Ferrous (N) – High Wear-Resistance to Moderate Wear-Resistance and Toughness; Stainless Steel (M) – High Wear-Resistance to Moderate Wear-Resistance and Toughness; Special, Super Alloys (S) – High Wear-Resistance to Moderate Wear-Resistance and Toughness; Steel (P) – High Wear-Resistance to Moderate Wear-Resistance and Toughness
Side Clearance Positive
Number Of Cutting Edges 2
Insert Shape Code C
Hole Diameter (Decimal Inch) 0.1732
Hole Diameter (Mm) ( – 0 Decimals) 4.40
Maximum Depth of Cut (mm) 1.25
Maximum Depth of Cut (Decimal Inch) 0.0492
Insert Holding Method Screw
Width (Inch) 3/8
Clearance Code C
Tolerance Code M
Coating Process PVD
Length Range (Decimal Inch) 0.3000 – 0.4000
Rake Positive
Insert Length (Decimal Inch) 0.3808
Insert Length (mm) 9.67
Primary Workpiece Material Stainless Steel; Superalloys & Titanium; Steel
Primary Workpiece Material Code P; S; K; M; N
Secondary Workpiece Material Code P; S; N
Standards ISO; ANSI
Manufacturers Catalog Number 1870984
Material Grade C3; C4
Coating Classification PVD
Chip Breaker LF
Rake Angle 5
Cutting Edge Style Honed
Industry Standard Number CCMT32505LF
Width (Decimal Inch – 4 Decimals) 0.3750
Multi-Use Tool Yes
Full Radius No
Multi-Use Application Facing; Turning; Boring
ANSI Size Code 32505
ISO Size Code 09T302
UNSPSC Code 23242105
Insert Size Code 32505
(Description).
Please review photos, comes as shown.
Fast shipping, straight from our warehouse in sunny Florida!
Industry Recycles
155 Center Ct, Venice, FL 34285
Date Nov 05 24
Lister#CM 14317
LocMeep 9
BRAND: Kennametal
INSERT MATERIAL: Carbide
MPN: does not apply
INSERT TYPE: Turning Insert
