Description
KENNAMETAL Turning Insert: WNMG432RN KCP10, Carbide 3753379
MSRP: $115
- Relief Angle 0
- Corner Radius (Inch) 1/32
- Corner Radius (Decimal Inch) 0.0313
- Included Angle 80
- Manufacturer Grade KCP10
- Coating/Finish TiCN; Al2O3
- Wiper Edge No
- Insert Hand Neutral
- Insert Thickness (Inch) 3/16
- Insert Thickness (Decimal Inch) 0.1875
- Series KENLOC
- Inscribed Circle (Inch) 1/2
- Inscribed Circle (Decimal Inch) 0.5000
- Insert Material Carbide
- Insert Shape Trigon
- Number Of Cutting Edges 6
- Insert Shape Code W
- Hole Diameter (Decimal Inch) 0.2031
- Hole Diameter (Mm) ( – 0 Decimals) 5.16
- Maximum Depth of Cut (mm) 1.25
- Maximum Depth of Cut (Decimal Inch) 0.0492
- Insert Holding Method Pin; Clamp
- Clearance Code N
- Tolerance Code M
- Coating Process MTCVD
- Length Range (Decimal Inch) 0.6500 – 0.7000
- Rake Negative
- Insert Length (Decimal Inch) 0.6840
- Insert Length (mm) 8.69
- Primary Workpiece Material Cast Iron; Steel
- Primary Workpiece Material Code P; K
- Standards ISO; ANSI
- Manufacturers Catalog Number 3753379
- Material Grade C3; C7
- Proprietary Coating Designation Multilayer Coating
- Coating Classification CVD
- Chip Breaker RN
- Rake Angle 0
- Cutting Edge Style Chamfered & Honed
- Industry Standard Number WNMG432RN
- Width (Decimal Inch – 4 Decimals) 0.684
- Multi-Use Tool Yes
- Full Radius No
- Multi-Use Application Facing; Turning; Boring
- UNSPSC Code 23242105
- Insert Style WNMG
- Insert Size Code 432
(Description).
Please review photos, comes as shown.
Fast shipping, straight from our warehouse in sunny Florida!
Industry Recycles
155 Center Ct, Venice, FL 34285
Date
Lister#
Loc
BRAND: Kennametal
INSERT MATERIAL: Carbide
MPN: 3753379
INSERT TYPE: Turning Insert
