Sale!
Osg 4Fl 8Mm X 19.00Mm X 60.00Mm Carbide Fx-Mg Roughing End Mill #8520080
$63.00 Original price was: $63.00.$27.47Current price is: $27.47.
OSG 8520080 4FL 8mm x 19.00mm x 60.00mm Carbide FX-MG Roughing End Mill
|
Grade: General Purpose
|
End Mill Material: Carbide |
| Number of Flutes: 4 |
Cutting Direction: Right Hand |
| End Mill Style: Square |
Helix Angle: 30 Degrees |
| Milling Dia.: 8.00mm |
Length of Cut: 19.00mm |
| Single End/Double End: Single End |
List Number: 3140 |
| Hardened (H) Compatibility: No |
Shank Dia.: 8.00mm |
| Super Alloy (S) Compatibility: No |
Non Ferrous (N) Compatibility: No |
| Overall Length: 60.00mm |
Cast Iron (K) Compatibility: Yes |
| Item: End Mill |
Stainless (M) Compatibility: Yes |
| Finish: EXO |
Steel (P) Compatibility: Yes |
| End Mill Cutting Type: Center |
Shank Type: End Mill |
| End Mill Application: Roughing/Finishing |
Dimension Type: Metric |
|
Model # 8520080
MSRP: $63
USPS Small Flat Rate
You are buying ONE End Mill described and pictured
Dina/3.6.14/Cab Fishsticks/Bin#59/#1465
BH 9/1/15
Modified By Kimmy 09-13-2016
Modified By Kimmy 01-11-2017
BRAND: OSG
MODEL: 8520080
MPN: Does Not Apply
MSRP: 63
FLUTES: 4-Flute
MATERIAL: Carbide
COUNTRY/REGION OF MANUFACTURE: Unknown
HELIX ANGLE: 30° Helix
QUANTITY: 1
CUTTING DIAMETER: 5/16in.
OVERALL LENGTH: 2-3/8in.
2 in stock
Description
OSG 8520080 4FL 8mm x 19.00mm x 60.00mm Carbide FX-MG Roughing End Mill
|
Grade: General Purpose
|
End Mill Material: Carbide |
| Number of Flutes: 4 |
Cutting Direction: Right Hand |
| End Mill Style: Square |
Helix Angle: 30 Degrees |
| Milling Dia.: 8.00mm |
Length of Cut: 19.00mm |
| Single End/Double End: Single End |
List Number: 3140 |
| Hardened (H) Compatibility: No |
Shank Dia.: 8.00mm |
| Super Alloy (S) Compatibility: No |
Non Ferrous (N) Compatibility: No |
| Overall Length: 60.00mm |
Cast Iron (K) Compatibility: Yes |
| Item: End Mill |
Stainless (M) Compatibility: Yes |
| Finish: EXO |
Steel (P) Compatibility: Yes |
| End Mill Cutting Type: Center |
Shank Type: End Mill |
| End Mill Application: Roughing/Finishing |
Dimension Type: Metric |
|
Model # 8520080
MSRP: $63
USPS Small Flat Rate
You are buying ONE End Mill described and pictured
Dina/3.6.14/Cab Fishsticks/Bin#59/#1465
BH 9/1/15
Modified By Kimmy 09-13-2016
Modified By Kimmy 01-11-2017
BRAND: OSG
MODEL: 8520080
MPN: Does Not Apply
MSRP: 63
FLUTES: 4-Flute
MATERIAL: Carbide
COUNTRY/REGION OF MANUFACTURE: Unknown
HELIX ANGLE: 30° Helix
QUANTITY: 1
CUTTING DIAMETER: 5/16in.
OVERALL LENGTH: 2-3/8in.
