Kennametal Turning Insert: Cpmt2151fp Kcs10, Carbide 3769350

KENNAMETAL Turning Insert: CPMT2151FP KCS10, Carbide 3769350

MSRP: $100

• 
  
• ANSI Insert Code CPMT2151
• ISO Insert Code CPMT060204
• Relief Angle 11
• Insert Style CPMT
• Corner Radius (Inch) 1/64
• Corner Radius (Decimal Inch) 0.0156
• Included Angle 80
• Manufacturer Grade KCS10
• Coating/Finish AlTiN
• Wiper Edge No
• Insert Hand Neutral
• Insert Thickness (Inch) 3/32
• Insert Thickness (Decimal Inch) 0.0938
• Series Screw-On
• Inscribed Circle (Decimal Inch) 0.2500
• Inscribed Circle (Inch) 1/4
• Insert Material Carbide
• Insert Shape C – Diamond (Rhombic) 80-Deg
• Chip Breaker Operation Finishing
• Grade Characteristics Cast Iron (K) – High Wear-Resistance to Moderate Wear-Resistance and Toughness; Aluminum & Non-Ferrous (N) – High Wear-Resistance to Moderate Wear-Resistance and Toughness; Hardened Materials (H) – High Wear-Resistance; Stainless Steel (M) – High Wear-Resistance to Moderate Wear-Resistance and Toughness; Special, Super Alloys (S) – High Wear-Resistance to Moderate Wear-Resistance and Toughness; Steel (P) – High Wear-Resistance to Moderate Wear-Resistance and Toughness
• Side Clearance Positive
• Number Of Cutting Edges 2
• Insert Shape Code C
• Hole Diameter (Decimal Inch) 0.1102
• Hole Diameter (Mm) ( – 0 Decimals) 2.80
• Maximum Depth of Cut (Decimal Inch) 0.0845
• Insert Holding Method Screw
• Width (Inch) 1/4
• Clearance Code P
• Tolerance Code M
• Coating Process PVD
• Length Range (Decimal Inch) 0.0000 – 0.3000
• Rake Positive
• Insert Length (Decimal Inch) 0.2539
• Insert Length (mm) 6.45
• Primary Workpiece Material Stainless Steel; Superalloys & Titanium
• Primary Workpiece Material Code P; S; H; K; M; N
• Secondary Workpiece Material Code P; K; N
• Standards ISO; ANSI
• Manufacturers Catalog Number 3769350
• Material Grade C3; C4
• Coating Classification PVD
• Chip Breaker FP
• Rake Angle 15
• Cutting Edge Style Honed
• Industry Standard Number CPMT2151FP
• Width (Decimal Inch – 4 Decimals) 0.2500
• Multi-Use Tool Yes
• Full Radius No
• Multi-Use Application Facing; Turning; Boring
• ANSI Size Code 2151
• ISO Size Code 060204
• UNSPSC Code 23242105
• Insert Size Code 2151

(Description).

Please review photos, comes as shown.

Fast shipping, straight from our warehouse in sunny Florida!

Industry Recycles

155 Center Ct, Venice, FL 34285